Terry Xiao Blog
Finance and Business
Fast Mounting Process To Add A HD Digital Radio
There are various data services to your car FM station. In that one which is to be mentioned is the HD radio which is the most famous data service and digital audio available in the market. These all can be delivered by our own FM stations. Installation of this HD radio is very important. The first unit that is to be installed is the head units. This unit is generally fixed directly in the factory premises. In this the radio by itself is connected to the unit of head. These provides as much controls to the radio. But how to hook up un HD radio to your car?
This article will list all the things that are required to install a HD radio and also the proper procedure to install the same to your car. Installing a HD radio to your car is simple thing to do and you need not search for an engineer or a mechanic to do this work. By doing this work on your own you can save your time and your money. The things that are required are the radio and an electrical tape. Make sure you have an electrical insulation tape of good quality to be in safer side.
After the things are ready, the first step to do is to disconnect the battery. This can be done by removing the negative end of the batter with the help of wrench or any other suitable tool. Then, an antenna jack that is present on HD radio is connected with the antenna of the car. This need not be done with the antenna input of the head unit but with the radio directly.
The antenna’s jack is connected to HD radio this is in turn connected to the antenna of the car. There is no necessity to connect it to the head of the input of the antenna. The black wire is to be connected to the black port and in the same way a yellow one to the yellow port. This set should be led to the chassis of the car.
The cable is connected to the CD player in your car using the blue coloured connector. This is called as IP BUS cable. The other end is connected to the head unit in the car’s dash board. HD radio’s connector is black in colour.
A cable that is either blue or white comes out from head unit. This cable is connected to the auto-antenna control terminal of the car. The manual of the car can be checked for this antenna. This is mainly for the control signal. Then, all the above wiring connections are secured by taping it with the electric insulation tape.
HD radio is mounted in the most convenient place in the car. Hook and loop fasteners are used to fix the HD radio under any seat to the car’s carpet. The reason why the radio is fixed under a seat is that the radio is controlled by the head unit in the dash board and not by the radio itself. The negative terminal of the car’s battery is reconnected and the radio is tested.
Hence this article teaches how to hook up an HD radio to your car.
Here You can find out more about , then visit Author Name’s site on how to choose the best for your needs.
RSS feed for comments on this post. TrackBack URI